Handling and Lifting Equipment

Flat glass handling and lifting equipment is designed to make moving large or multiple pieces of glass around your shop easier and safer.

Wood's

Rotators

woods_mr411lac.jpg

MR411LAC - ROTATING LIFTER

Number / Size of Vacuum Pads: Qty. 4 / 11” diameter lipped

Standard Vacuum Pad Spread: 26” X 32” [660.4 x 812.8 mm]

Load Capacity*: 700 pounds [318 kg]
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Unit Weight: 61 lbs [28 kg]

Standard Operating Power: 100, 120, 240 volt AC – 60hz

Load Movement: Manual rotation, 360° edgewise with locking at each quarter point

Standard Features:
Vacuum gauge
Vacuum reserve tank
Vacuum line filter
Spring-mounted vacuum pads
Twist-lock electrical plug
Blow-off for quick release

woods_mr49lac.jpg

MR49LAC - ROTATOR TILTER

Number / Size of Vacuum Pads: 4 / 9" [229 mm] diameter vacuum pads

Standard Vacuum Pad Spread: 23-1/4" x 29-1/4" [588 x 740 mm]

Load Capacity*: 500 lbs [225 kg]
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Average Weight of Vacuum Lifter: 61 lbs [28 kg]

Standard Operating Power:
120 volts AC, 60 hertz, 3 amps
(100 volts AC, 60 hertz, 3 amps and
240 volts AC, 60 hertz, 2 amps also available)

Apply / Release Times: 5 seconds / 4 seconds (approx)

Load Movement: Manual rotation, 360° edgewise with locking at each quarter point

Standard Features:
Vacuum gauge
Vacuum reserve tank
Vacuum line filter
Spring-mounted vacuum pads
Twist-lock electrical plug
Blow-off for quick release

 

QUADRA-TILT

MRTA811LDC2

MRTA811LDC3 – QUADRA-TILT ROTATOR PREMIUM EDITION

Intelli-Grip Technology
Automatic self-testing assures flat glass lifting equipment is ready for use, every lift. Color display provides critically relevant information at a glance. Anticipates threats and alerts operator beforehand with clearly visible and audible warnings. Continuously monitors battery and prevents lifter from attaching to loads if energy is hazardously low. Multiple alarm levels plainly identify the severity of hazards.

Dual Vacuum System
Features two completely independent vacuum circuits. Provides vacuum system redundancy. Limits possibility of a catastrophic failure. Reduces chance of harm to personnel or equipment.

Number / Size of Vacuum Pads: 8 / 11" [28 cm] diameter, lipped pads

Standard Vacuum Pad Spread:
Minimum Width: 12-1/2" [32 cm]
Maximum Width: 58-3/4" [149 cm]
Minimum Length: 47" [119 cm]
Maximum Length: 104-3/4" [266 cm]

Load Capacity*:
1400 lbs [635 kg] maximum
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Weight of Lifter: 200 lbs [91 kg]

Standard Operating Power: 12 volts DC, 4.5 amps

Load Movement:
Manual rotation, 360° edgewise, with automatic locking at each quarter point
Assisted manual tilt, 90° between upright and flat

Standard Features:
Intelli-GripTM technology
Dual vacuum system
Battery and charger
Battery energy gauge
Low vacuum strobe light
Low vacuum/power loss warning buzzer with back-up battery
Green lift light
Vacuum gauges
Vacuum line filters
Vacuum reserve tanks
Spring-mounted vacuum pads
(Re)movable pad mounts
Pad extension arms
Tilt locks
Blow-off for quick release
Two-action, push-button release

MRTA811LDC – QUADRA-TILT LIFTER

Number/Size of Vacuum Pads: 8 / 11" [279 mm] diameter

Standard Vacuum Pad Spread: 49" x 72-1/2"

Load Capacity*: 1400 lbs [635 kg]
*On smooth, nonporous surfaces.  Please contact us for recommendations on other surfaces.

Average Weight of Vacuum Lifter: 302 lbs [137 kg]

Standard Operating Power: 12 volts DC - 21 amps

Load Movement: Manual rotation, 360° edgewise, with automatic locking at 1/4 revolution, assisted manual tilt, 90 between upright and flat

 

Rotator/Tilters

MRT49DC

MRT49DC – ROTATOR TILTER

Standard Pad Spread:
25-1/4" x 30" [642 x 760 mm] (basic configuration)
45-1/4" x 64-3/4" [1152 x 1643 mm] (extended configuration)
75-1/4" x 12-3/4" [1914 x 323 mm] (linear configuration)

Number / Size of Vacuum Pads:
4 / 9" [23 cm] diameter pads

Maximum Load Capacity:
500 lbs [225 kg]

Weight of Lifter:
135 lbs [62 kg] (Note: Does not include weight of any options.)

Standard Operating Power:
12 volts DC, 10 amps

Load Movement:
Manual rotation, 360° edgewise, with locking at each quarter point
Manual tilt, 90° between upright and flat, with automatic latching in upright position

Standard Features:
Low vacuum warning light
On-board battery and charger
Battery energy gauge
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
Spring-mounted vacuum pads
Movable pad mounts
Pad extension arms

woods_mrt411ldc.jpg
 

MRT411LDC - ROTATOR TILTER

Number / Size of Vacuum Pads: 4 / 11" [280 mm] dia. lipped vacuum pads

Standard Vacuum Pad Spread:
28" x 32-3/4" [715 x 833 mm] (basic configuration)
48" x 67-1/2" [1225 x 1716 mm] (extended configuration)
78" x 15-1/2" [1987 x 396 mm] (linear configuration)

Load Capacity*: 700 lbs [320 kg]
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Average Weight of Vacuum Lifter: 122 lbs [56 kg]

Standard Operating Power: 12 volts DC, 8 amps

Load Movement:
Manual rotation, 360° edgewise, with locking at each quarter point
Manual tilt, 90° between upright and flat, with automatic latching in upright position

Standard Features:
Low vacuum warning light
On-board battery and charger
Battery energy gauge
Vacuum gauge
Vacuum line filter
Vacuum reserve tank
Spring-mounted vacuum pads
Movable vacuum pad mounts
Vacuum pad extension arms

MRT411LDC2

MRT411LDC3 – ROTATOR TILTER PREMIUM EDITION

Intelli-Grip Technology
Automatic self-testing assures flat glass handling equipment is ready for use, every lift. Color display provides critically relevant information at a glance. Anticipates threats and alerts operator beforehand with clearly visible and audible warnings. Continuously monitors battery and prevents lifter from attaching to loads if energy is hazardously low. Multiple alarm levels plainly identify the severity of hazards.

Dual Vacuum System
Features two completely independent vacuum circuits. Provides vacuum system redundancy. Limits possibility of a catastrophic failure. Reduces chance of harm to personnel or equipment.

Standard Pad Spread:
28-1/4" x 32-3/4" [72 cm x 83 cm] (basic configuration)
48-1/4" x 67-1/2" [123 cm x 172 cm] (extended configuration)
78-1/4" x 15-3/4" [199 cm x 40 cm] (linear configuration)

Number / Size of Vacuum Pads:
4 / 11" [28 cm] diameter, lipped pads

Maximum Load Capacity:
700 lbs [320 kg]

Weight of Lifter:
125 lbs [57 kg]

Standard Operating Power:
12 volts DC, 4.5 amps

Load Movement:
Manual rotation, 360° edgewise, with locking at each quarter point
Manual tilt, 90° between upright and flat, with automatic latching in upright position

Standard Features:
Intelli-Grip™ technology
Dual vacuum system
High-flow vacuum pump
Battery and charger
Battery energy gauge
Low vacuum warning buzzer
Power loss warning buzzer
Green lift light
Vacuum gauges
Vacuum line filters
Vacuum reserve tanks
Spring-mounted vacuum pads
Movable pad mounts
Pad extension arms
Blow-off for quick release
Two-action, push-button release

woods_mrtalp611ldcs.jpg

MRTALP811LDC3 – LOW-PROFILE MANUAL ROTATOR/TILTER LIFTER

Intelli-Grip Technology
Automatic self-testing assures flat glass lifting equipment is ready for use, every lift. Color display provides critically relevant information at a glance. Anticipates threats and alerts operator beforehand with clearly visible and audible warnings. Continuously monitors battery and prevents lifter from attaching to loads if energy is hazardously low. Multiple alarm levels plainly identify the severity of hazards.

Dual Vacuum System
Features two completely independent vacuum circuits. Provides vacuum system redundancy. Limits possibility of a catastrophic failure. Reduces chance of harm to personnel or equipment.

Number / Size of Vacuum Pads: 8 / 11" [280 mm] diameter vacuum pads

Standard Vacuum Pad Spread:
Minimum Width: 17" [43 cm]
Maximum Width: 52-3/4" [134 cm]
Minimum Length: 44-1/2" [113 cm]
Maximum Length: 102" [259 cm]

Load Capacity*:
1100 lbs [500 kg] maximum
184 lbs [83.5 kg] per pad
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Profile Thickness*: 8” (203 mm)
*does not include load

Lifter Weight: 220 lbs [100 kg]

Power System: 12 volts DC , 5 amps

Load Movement:
Manual rotation, 180° edgewise, with automatic latching every 30°
Assisted manual tilt, 90° between upright and flat with automatic latching in upright position

Standard Features:
Dual vacuum system
Low vacuum warning buzzer
Green lift light
On-board energy gauge
Vacuum gauges
Vacuum reserve tank
Vacuum line filter
Spring-mounted vacuum pads
Vacuum pad extension arms
Blow-off for quick release

 

CHANNEL LIFTERS

Channel Lifters are comprised of one or more Pad Channels and interchangeable Lift Frames for manually rotating and tilting materials. These vacuum lifters may be ordered as complete units or as individual components to expand existing Channel Lifter systems. Lift Frames are available in single-channel.

woods_p11104dc.jpg

P11104DC - CHANNEL LIFTER

Number / Size of Vacuum Pads: 4 / 11" [280 mm] dia. lipped vacuum pads
(for flat materials)

Standard Vacuum Pad Spread: 51" x 12" [1295 x 305 mm]

Load Capacity*: 700 lbs [320 kg]
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Average Weight of Vacuum Lifter: 70 lbs [32 kg]

Standard Operating Power: 12 volts DC, 8 amps (for each Pad Channel)

Load Movement:
Manual rotation, 180° edgewise, with locking in three positions.
Manual tilt, 90° between upright and flat, with automatic latching in upright position
(Lifters can be tilted ONLY when lift bar is locked in center position, as shown at left.)

Standard Features*:
On-board battery and charger
Battery energy gauge
Low vacuum warning light
Vacuum gauge
Vacuum line filter
Vacuum reserve tank

*On each Pad Channel

P11104DC2

P11104DC3 – CHANNEL LIFTER PREMIUM EDITION

Intelli-Grip Technology
Automatic self-testing assures flat glass handling equipment is ready for use, every lift. Color display provides critically relevant information at a glance. Anticipates threats and alerts operator beforehand with clearly visible and audible warnings. Continuously monitors battery and prevents lifter from attaching to loads if energy is hazardously low. Multiple alarm levels plainly identify the severity of hazards.

Dual Vacuum System
Features two completely independent vacuum circuits. Provides vacuum system redundancy. Limits possibility of a catastrophic failure. Reduces chance of harm to personnel or equipment.

Standard Pad Spread:
51" x 12" [130 x 30 cm]

Number / Type of Vacuum Pads:
4 / 11" [28 cm] diameter, lipped pads

Maximum Load Capacity:
700 lbs [320 kg]

Weight of Lifter:
95 lbs [44 kg]

Standard Operating Power:
12 volts DC, 5 amps

Load Movement:
Manual rotation, 180° edgewise, with locking in three positions.
Manual tilt, 90° between upright and flat, with automatic latching in upright position
(Units can be tilted ONLY when lift bar is locked in center position, as shown on drawings.)

Standard Features:

Intelli-GripTM Technology
Adjustable-position lift spool
Dual vacuum system
High-flow vacuum pump
Battery and charger
Battery energy gauge
Low vacuum strobe light
Low vacuum/power loss warning buzzer with back-up battery
Green lift light
Vacuum gauges
Vacuum line filters
Vacuum reserve tanks
Blow-off for quick release
Two-action, push-button release

woods_mrtalpch611dcs.jpg

MRTALPCH611LDC – LOW-PROFILE CHANNEL MANUAL ROTATOR/TILTER LIFTER

Number / Size of Vacuum Pads: 6 / 11" [280 mm] diameter vacuum pads

Standard Vacuum Pad Spread:
6 pads: 79-1/4” x 12” (2010 x 305 mm)
4 pads: 54” x 12” (1371 x 305 mm)

Load Capacity*:
6 pads: 1100 lbs [500 kg] maximum
4 pads: 736 lbs [334 kg] maximum
*On smooth, nonporous surfaces. Please contact us for recommendations on other surfaces.

Profile Thickness*: 7-3/4” (197 mm)
*does not include load

Average Weight of Vacuum Lifter: 125 lbs [57 kg]

Standard Operating Power: 12 volts DC - 10 amps

Load Movement:
Manual rotation, 180° edgewise, with locking in 3 positions
Assisted manual tilt, 90° between upright and flat with automatic latching in upright position

Standard Features:
Dual vacuum system
Low vacuum warning buzzer
Green lift light
On-board battery and charger
Vacuum gauges
Vacuum reserve tank
Vacuum line filter
Spring-mounted vacuum pads
Removable pad frame extension arms
Blow-off for quick release

Groves

Carts

Six Wheeled Fabrication Cart

• Holds up to 3,200 pounds.
• Heavy duty rubber is mounted on the
base and the uprights to help prevent
slipping and damage to the material.
• Ratchet straps are provided to secure
material to the cart.
• Heavy duty powder coated finish.
3,200 lb capacity, 48" L x 47" H x 28" W.........FC48
3,200 lb capacity, 82" L x 73" H x 28" W.........FC82

Heavy Duty Shop Cart

• The HDSC-48 uses 5" casters, two rigid
and two swivel with brake, rated at
1,000 lbs. each.
• Ratchet straps are included
to secure load.
• Pull handle mounted on one end
for maneuverability.
• Heavy duty powder coated finish
for long lasting durability.
4,000 lb capacity,
54" L x 38" W x 62" H...........................HDSC48
84" L x 40" W x 63" H.......................HDSC8448
84" L x 40" W x 87" H.......................HDSC8472

Single Sided Shop Cart

• 36" Load Height
• 7" ledge depth.
• 10" diameter semi-pneumatic
tires and 5" diameter swivel
locking casters.
• Neoprene rubber on uprights
and base.
• Heavy duty powder coated finish.
2,000 lb capacity,
40" L x 24" W x 45" H..................... SSSC-4036
40" L x 24" W x 41" H............................. BB-40

Tilt Table Cart

• Four swivel 5" diameter casters.
• Four heavy duty foot operated locks prevent
movement while fabricating.
• Heavy duty powder coated finish.
600 lb capacity,
72" L x 32" W x 36" - 42" Adj. height................TT3272

Racks

Heavy Duty Tranpsort Rack

• Four hold down ratchet straps
secure load.
• Four adjustable safety posts provide for
safe removal of unstrapped loads that
may shift unexpectedly.
• Safety posts are stored at the end of
the A-Frame during transport.
10,000 lb capacity, 96" L x 48" W x 88" H.......TR-10
Optional caster kit...........................................CK-8000

Transport Rack

• Designed for transporting and storing product in your shop or
on the job.
• Fork lift hoops mounted on sides.
• Bottom pads and uprights have full length rubber strips.
• Quick release mounting pins change the Transport Rack from
mobile to stationary in less than a minute with the optional
CK-4 Caster Kit.
• Hot dip galvanized finish.
4,000 lb capacity,
82" L x 44" W x 58" H............... TR4482
4,000 lb capacity,
96" L x 44" W x 70" H............... TR4496
Optional Caster Kit....................CK-4

Economy Transport Rack

• Fork lift hoops mounted on sides.
• Includes hold down straps to secure material to cart.
• Bottom pads and uprights have full length rubber strips.
• Heavy duty powder coated finish.
2,200 lb capacity,
84" L x 35" W x 67" H.......................ETC-8460
84" L x 35" W x 55" H.......................ETC-8448

HR-4860

Harp Rack

• Uses thick High Density Polyethylene on the floor for easy sliding of glass
and provides a non-stick surface for insulated glass.
• Includes 4 non-marking swivel casters rated at 1000 lbs. capacity each.
• Two foot locks mounted in front for stability.
• Gray powder coated finish.
80" W x 48" D....................................................HR-4860

Tables

GCT-4884

Glass Cutting Table

• Plywood will be mounted to the top and bottom shelf.
• Two rigid and two swivel brake 5" casters.
• Gray powder coat finish.
• Shelf height is 16" from the floor.
84" L x 48" W x 36" H........................................GCT-4884

Heavy Duty Fabrication Table

• Durable rubber is mounted on the top of the
table to protect material.
• Freestanding units come with four legs that
have leveling feet.
• Heavy duty powder coated finish for
longlasting durability.
600 lb capacity, 84" L x 24" W x 43" H
FREESTANDING.................................................HDT84F
MOBILE..............................................................HDT84M

Fabrication Table

• Rubber is mounted on top and the sides where the carts
clamp together.
• Two built-in end clamps hold the tables together.
• Four heavy duty 5" diameter swivel casters.
• Four foot operated locks hold the table in place.
• Heavy duty powder coated finish for long lasting durability.
600 lb capacity, 60" L x 25" W x 42" H............DT2560

Storage and Frames

Foldable A-Frame

• Heavy duty powder
coated finish.
• Ledge Length 20.5"
• 6" spread on top of A.
24,000 lb capacity,
60" L x 60" W x 58" H......................................... FAF-60

Glass Storage

Multi-Purpose Glass Storage System

• Store loose lites, insulated glass, tempered glass, plastic sheets,
shower doors and more. The center rail with easy slide must
be used to support the glass when sliding individual pieces
in and out of the racks.
• Optional Easy Slide, a low friction material, is mounted to the
rails and posts for ease of sliding products in and out.
• Outside rails have 2" square holes spaced 4" apart on the top.
A steel plate with identical holes is welded and boxed inside
the rails, 1" up from the bottom.
• 2" square tube posts.

Length        Openings          Part #
5 ft...................... 4..................4PAK
10ft..................... 9..................9PAK
20ft................... 19................19PAK
50ft................... 49................49PAK
5 ft...................... 4..............4PAKES
10ft..................... 9..............9PAKES
20ft................... 19............19PAKES
50ft................... 49............49PAKES

Miscellaneous

FLB

Fork Lift Boom

• Boom is designed for use on forklift trucks.
• When fully extended, the boom has a reach of 98".
Extended - 102" Long x 22" Wide x 18" High ,
Retracted - 62" Long 22" Wide x 15" High..................FLB

Glass Sling

Glass Slings

• Workloads are rated 9,600 lbs. per sling in a vertical lift.
• The inside of slings and horizontal straps are covered with reinforced
PVC coated material to help prevent cutting.
• Made with 3" wide polyester webbing which minimizes elongation
to 3% or less.
• Velcro straps prevent slings from shifting on beam when not under load.
78" Long sling for glass 36" up to 54" high...................... 78S
108" Long sling for glass 60" up to 84" high.................108M
124" Long sling for glass 72" up to 100" high................ 124L
160" Long sling for glass 130" up to 204" high.............. 160J

 

WarningCALIFORNIA PROPOSITION 65Warning

Concerning the sale of WPG products in California:

Proposition 65 Warning: Some Woods Powr-Grip products sold may contain chemicals known to the state of California to cause cancer and birth defects or other reproductive harm.

Due to the large number and range of WPG products, and out of an abundance of caution, Wood’s Powr-Grip has chosen to provide this warning on all products without yet attempting to evaluate the level of exposure (if any).

For more information, see the California Proposition 65 website.

https://oehha.ca.gov/proposition-65/about-proposition-65

 

WoodsGroves